HOW TO Install a STORM DOOR and BRICK MOULDING [Home Improvement]

Replacing a Storm Door At this point I realized that the wood was too far gone to salvage and decided to replace the brick mould. Pre-mitered exterior brick mould door set (PVC) Finish trim head screws In hindsight, I should have plumbed the brick moulding before screwing it in. The gap at the bottom of […]

Continue Reading...

Install Under-Cabinet and In-Cabinet LED Strip Lighting [Home Improvement]

Installing In- and Under Cabinet Lighting This is switched mains power (120-volts US) Connect Line (black) and neutral (white) Here I’m controlling the under-lights from one side and the in-lights from the other 16 ga lamp wire Tin the wire and the contacts on the LED strip Be sure to keep the positive and negative […]

Continue Reading...

HOW TO REPAIR A LEAKING RADIATOR VALVE – Plumbing Tips

If you’ve been lucky enough to stumble across this plumberparts.co.uk video all about how to fix radiator valves, then great, we’re gonna get down to that any minute. Before we do, I’d like to ask you to subscribe to our video by clicking on the card that’s appearing now. They’re available throughout the whole of […]

Continue Reading...

TOILET FLUSH SIPHON UNITS – Repair diaphragm – Plumbing Tips

– [Announcer] Plumberparts.co.uk, honest reviews and advice. – Hold tight and welcome to today’s plumberparts.co.uk video. Today we’re going to look into the world of syphon units, we’ve done a load of videos before on how you actually take one of these out and replace it. But we’ve never done a video on actually how […]

Continue Reading...

Wrangler Rugged Ridge A/T Fender Liner Kit, 4 Pieces w/ Hardware (2007-2017 JK) Review & Install

I’m Ryan from extremeterrain.com and this is my install and review of the Rugged Ridge AT Fender Liner Kit with Hardware, fitting all 2007 to 2016 JKs that have the Rugged Ridge AT Fender Flare Kit installed. Today, we’re going to talk about the construction, the features, and a little bit about the pricing of […]

Continue Reading...