1.6HDi/TDCi improved oil catch can installation (Provent 200) (Peugeot/Citroen/Ford/Volvo)

I’ll show you how to go from this to this with an Oil Catch Can installation in reverse order stay tuned so why in reverse order? well I have already installed it so this is the intake going to the turbo this is the tube coming out of the crankcase breather going into a catch […]

Continue Reading...

How To Replace Axle Seals & Bearings In Ford 7.5 & 8.8 Differential – Ford Mustang

Hey this is another video by Pet Rock and today I’m working on my wife’s ’98 Ford Mustang. It’s a 3.8 liter with a 7.5 inch rear end. And today I removed the axles to replace the spider gears. And while I did that I also noticed that the axle seals have been leaking. You […]

Continue Reading...

BALL JOINTS REPLACEMENT ON DODGE RAM | HOW TO PRESS IN UPPER+LOWER, REMOVE,REPAIR,DETAIL INSTALL,DIY

hi guys this is Geramicc85 and today I’ll be replacing the upper and lower ball joints on my Dodge Ram 1500 i bought 4 new ball joints two upper ball joints and these are the two lower ball joints I’ll be replacing one side first and then the second side, passenger side, is usually all […]

Continue Reading...

How to replace glow plugs on 1.6HDi/TDCi diesel engines (Peugeot, Citroen, etc.)

right so this is my 1.6 HDI engine and it’s been running a little bit rough when when it’s cold so I’ve already changed the battery so it’s not really the battery it’s probably the glow plugs which are behind the back of the airbox so I decided to replace the glow plugs. First I […]

Continue Reading...