Come back again with mk channel This time we will fix the 2 door refrigerator Complaints are not cold The word that has Frequently die printing print on the back Frequent compressor dead often means Okay we test the amperage, use the amperage pliers Ampere shows 2.5 2.6 Pretty high, it should be 1.4 We wait, we wait OK die, the compressor turns out turns out Okay now we check We check the overload And the relay We release, we first check That’s the overload We check one by one Okay Usually this relay if hilariously hilarious usually broken But we want to make sure to use the avometer first, it doesn’t show Not visible, but the results are normal The results are normal Overload is also normal Hilarious funny but normal, so it’s doubtful Try later we replace We replace, we replace the relay This is the relay we will replace Rellay with 1 leg There are legs left, relay 1 foot Okay we install again Okay we check the pin Pinya compressor While opened, we check the compressor’s pinya The checking results are still good, the turns are still good Sorry, the avometer is closed by the hand The Avometer is covered by a hand But the results are good Okay we try again, we install again Okay, to make it easier for us to use hairpins, let’s stick directly Use only the staples So no need to go through the engine No need to go through a timer So we know, the damaged one is in the compressor area or electrically in the timer Well this way, if indeed The compressor is dead That means we know that the compressor is not on the timer Okay we try again with new relay We see the amperage Wait a minute, please Still running, we wait until he is off He said 10 minutes off himself While we check short, contact the body Oo, it turned out It’s off, sorry it’s closed Tang ampere is not visible OK we let it go again, we’ve replaced the new one, it turns out It turns out that the compressor is still off by itself We try again Let’s replace the overload Maybe the overload is already weak We will try again later Okay, Off again Off again Off again We are free again This time we will replace the relay with 2 legs 2 right and left foot We will replace the relay, we will also overload everything We will check to confirm the overload This overload is indeed good, it’s not broken Or maybe he is weak We replace all We replaced the overload We will replace this relay Let’s change the relay Rellay that we just replaced We will replace this with another relay This is using relay 2 feet right and left We test, we test first OK, go OK, go We wait Ooo die again, die again Now we release first, everyone Now we want to add a capacitor We add capacitors Capacitors on both legs of the relay The relay uses 2 feet, we add Capacitor We take it off first That’s the relay Unload again We are free again We installed the overload We installed the relay We try again OK we try, we attach the amperage pliers We turn it on again, does he still want to die again Woo the ampere is very high Five point Five point This compressor is jammed We are released again, now we want to add capacitors Capacitors on the second leg of the relay This one hasn’t been installed yet This time we want to install the capacitor On the second leg of the relay Legs relay there are two right and left That’s while we just hang it first We pinch it, we attach it I see Okay Okay, it’s installed These are tongs on the second leg of the relay We get a capacitor Left right For the left leg rellay You can get direct electricity later So the electric foot adjusted Okay that can overload one Overload one Now this is the one at the foot of the capacitor, we put red This red line is Please leave Now we attach the amperage pliers Hopefully successful OK we try Sorry, that’s the amper’s tang invisible Okay good means this He is on This is a 5 micro capasitor, we put 5 micro Now this is 2.1 normal results, 2.4 Normal This is already normal, running normally Well this scheme, well, it looks like that, thanks, yeah subscrebe