repair clinic encourages you to perform
this procedure safely in this video we will show one or more
of these icons to alert you when to use caution before you begin this repair make sure
the engine has cooled removed the wire and boot from the spark
plug or plugs then disconnect the cables from the
battery black first then red you should do this repair with little or
no gasoline in the tank your first step is to use locking pliers
or a fuel line clamp to close the fuel line then released the clamp and pull the
fuel line off be aware some gasoline may spill out next use a socket to remove the nut
securing the air filter housing detach the breather tube and pull the
housing off slide the old carburetor and gaskets off
the mounting bolts and rotate the carburetor upward to detach the throttle
and choke linkages install the new carburetor by first
positioning the rear gasket next attach the throttle and choke
linkages to the new carburetor slide the carburetor onto the bolts and
position the front gasket reposition the air filter housing and
insert the breather tube into the rocker cover secure the nuts reconnect the fuel line secure the clamp and remove the locking pliers or fuel
line clamp with the new carburetor in place you can
now reconnect the battery cables red first then black finally reattach the wire and boot to
the spark plug or plugs