The hardware diagnostics on your Dell EMC
server can help identifying issues and defects. Here is how to run it through the Lifecycle
Controller. You can access your server directly or connect
through the iDRAC using the Virtual Console. Reboot or start the server. At the POST screen press F10 to access the
Lifecycle Controller. in the menu, go to Hardware Diagnostics and
click Run Diagnostics Confirm the pop-up message. The Diagnostics will now test your system. This will take several minutes to complete. after completing the basic test, and if no
problems have been found, you are prompted to run the remaining memory tests. This may take several hours to complete. We recommend this if no issues have been found so far. If you don’t want to run it, you can click
no and exit the diagnostics. Thanks for watching Don’t forget to subscribe, ring the bell
and leave a like if this video was helpful. For more tips and tricks, check out the other
tutorials on our channel. If you have any questions, contact our support
staff via Twitter or the Dell Community Forums.