Hi, it’s Steve from PartSelect. Today we’re
going to show you how to change the light bulb on your dryer. Really easy job, all you’re
going to need is a Phillips screwdriver. Let me show you how we do it. Now to change the light bulb on this model
of dryer we need to open the door, and located on the rear bulkhead there is a plastic cover
that encases the light bulb. It’s held in place by a single Philips screw. Just remove
the screw, tilt the cover up, and lift it out. If the cover is missing on yours or is damaged
it should be replaced. We’ll simply unscrew the bulb. Make sure you have it threaded in tightly. Next we’ll replace that cover; hook the
tab on the top first, then replace the screw, and our repair is complete. Told you that was an easy job. Thanks for
watching, and good luck with your repair.